Description
FulaSeal™ 780 Plumbers Silicone Sealant Is A Non-Corrosive Neutral Cure Sealant That Can Be Used On A Wide Range Of Substrates. It Is Ideal For Roofing Applications, Exterior Cladding, Guttering, Flashing, Downpipes, General Plumbing And Is Compatible With Drinking Water Storage Systems. Best Used On Sheet Metal And Aluminum Roofing Applications, Exterior Cladding, Guttering, Flashing, Downpipes.
Benefits:
- Tested By The Australian Water Quality Centre And Meets The Requirements Of AS4020-2005, Products For Use In Contact With Drinking Water.
- Permanently Flexible.
- Water Resistant.
- UV And Weather Resistant.
- Resistant To Temperature Extremes: -50°C to 150°C.
- 25% Dynamic Movement Capability.
- One Part, Ready To Use.
- Non-Acidic, Will Not Corrode Metal.
- 25 Year Guarantee Against Cracking And Crumbling When Used In Standard Conditions And Applications.
Compatible Substrates: Steel, Stainless Steel, Galvanized Iron, Aluminum, Ceramic Tiles, Masonry, Lead, Terracotta, Glass, Zincalume, Fiberglass, Most Plastics (Pretest).
Features
| For use with potable (drinking) water (AS4020) |
| Permanently flexible; ±25% joint |
| movement capability |
| Interior/exterior |
| Neutral cure – will not corrode steel or galvanized iron |
| Waterproof |
- Property
- Data
- Specific Gravity
- 1.02 Trans, 1.02 Aluminium, 1.3 Grey
- Sag
- Nil
- Tooling Time
- 5 minutes
- Skinning Time
- 15-25 min, 25°C, 50% RH
- Cure Rate
- 1-2 mm / day
- Full Cure
- Dependant on thickness
- Service Temperature
- -50°C to 150°C
- Water Immersion
- Not suitable
- Joint Movement
- + 25%
- Joint Size
- Width 4 mm to 25 mm Depth = 0.5 - 1 x width (20mm maximum)
- Shore A Hardness
- 19 trans, 19 Aluminium, 26 grey
- Ultimate Tensile Strength (Full Cure)
- Trans 0.36MPa, Grey 0.78MPa
- Ultimate Elongation at Break (Full Cure)
- Trans 220%, Grey 280%
fulaseal_780_plumbers_silicone_tds - FORGEPLUMBING.pdf
Download