FulaSeal 780 Plumbers Roof & Gutter Silicone 300ml - Aluminium (Matches SS)
Same Day Despatch
4HRS 10 Mins Left
  2. Shop
  3. FulaSeal 780 Plumbers Roof & Gutter Silicone 300ml - Aluminium (Matches SS)
Jumper Valve Nylon Premium DN12mm (1/2")
Jumper Valve Nylon Premium DN12mm (1/2")
Login | Register to see price
Jumper Valve Nylon Premium Copper DN12mm (1/2") Soft Close
Jumper Valve Nylon Premium Copper DN12mm (1/2") Soft Close
Login | Register to see price
IN STOCK

FulaSeal 780 Plumbers Roof & Gutter Silicone 300ml - Aluminium (Matches SS)

Login | Register to see price
( Units)

    This combination does not exist.

    IN STOCK - Will ship today
    Details
    Product Code :
    S780A
    Share :

    Description

    FulaSeal™ 780 Plumbers Silicone Sealant Is A Non-Corrosive Neutral Cure Sealant That Can Be Used On A Wide Range Of Substrates. It Is Ideal For Roofing Applications, Exterior Cladding, Guttering, Flashing, Downpipes, General Plumbing And Is Compatible With Drinking Water Storage Systems. Best Used On Sheet Metal And Aluminum Roofing Applications, Exterior Cladding, Guttering, Flashing, Downpipes.

    Benefits:

    • Tested By The Australian Water Quality Centre And Meets The Requirements Of AS4020-2005, Products For Use In Contact With Drinking Water.
    • Permanently Flexible.
    • Water Resistant.
    • UV And Weather Resistant.
    • Resistant To Temperature Extremes: -50°C to 150°C.
    • 25% Dynamic Movement Capability.
    • One Part, Ready To Use.
    • Non-Acidic, Will Not Corrode Metal.
    • 25 Year Guarantee Against Cracking And Crumbling When Used In Standard Conditions And Applications.

    Compatible Substrates: Steel, Stainless Steel, Galvanized Iron, Aluminum, Ceramic Tiles, Masonry, Lead, Terracotta, Glass, Zincalume, Fiberglass, Most Plastics (Pretest).


    Features

    ​ For use with potable (drinking) water (AS4020)​​​
     Permanently flexible; ±25% joint
     movement capability
     Interior/exterior
     Neutral cure – will not corrode steel or galvanized iron
     Waterproof




    Property
    Data
    Specific Gravity
    1.02 Trans, 1.02 Aluminium, 1.3 Grey
    Sag
    Nil
    Tooling Time
    5 minutes
    Skinning Time
    15-25 min, 25°C, 50% RH
    Cure Rate
    1-2 mm / day
    Full Cure
    Dependant on thickness
    Service Temperature
    -50°C to 150°C
    Water Immersion
    Not suitable
    Joint Movement
    + 25%
    Joint Size
    Width 4 mm to 25 mm Depth = 0.5 - 1 x width (20mm maximum)
    Shore A Hardness
    19 trans, 19 Aluminium, 26 grey
    Ultimate Tensile Strength (Full Cure)
    Trans 0.36MPa, Grey 0.78MPa
    Ultimate Elongation at Break (Full Cure)
    Trans 220%, Grey 280%
    fulaseal_780_plumbers_silicone_tds - FORGEPLUMBING.pdf
    Download