Hot Water Valves
Hot Water Valves
AVG Tempering Valve 15mm - Standard Yellow Cap c/w Insulation.
FTV15
Description
The FORGE Standard Tempering Valve is perfect for applications needing to mix hot and cold water to deliver a continuous temperate water temperature through a hot water system.
Features
- Integral mesh strainers
- Cast DR brass body
- Integral non return valves
- Innovative polymers for greater resistance to calcium deposits
- Factory set at 50°C (must be commissioned on site)
- Tested and certified to AS 4032.2
- Insulation jacket provided as per AS 4032.2
AVG Tempering Valve 15mm - High Performance Orange Cap c/w Insulation
FTV15HP
Description
The FORGE Standard Tempering Valve is perfect for applications needing to mix hot and cold water to deliver a continuous temperate water temperature through a hot water system.
Features
- Integral mesh strainers
- Cast DR brass body
- Integral non return valves
- Innovative polymers for greater resistance to calcium deposits
- Factory set at 50°C (must be commissioned on site)
- Tested and certified to AS 4032.2
- Insulation jacket provided as per AS 4032.2
AVG Press & Temp Relief Valve (HT55) 15mm - 700 to 1400Kpa
FPTR15
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG 15mm Cold Water Expansion Control Valve
EV15
AVG Thermostatic Mixing Valve 15mm
FTMV15
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with Australian standards.
Features
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
AVG Thermostatic Mixing Valve 20mm
FTMV20
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with Australian standards.
Features
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
AVG 20mm Cold Water Expansion Control Valve
EV20
AVG Tempering Valve 20mm - High Performance Orange Cap c/w Insulation
FTV20HP
Description
The FORGE Standard Tempering Valve is perfect for applications needing to mix hot and cold water to deliver a continuous temperate water temperature through a hot water system.
Features
- Integral mesh strainers
- Cast DR brass body
- Integral non return valves
- Innovative polymers for greater resistance to calcium deposits
- Factory set at 50°C (must be commissioned on site)
- Tested and certified to AS 4032.2
- Insulation jacket provided as per AS 4032.2
AVG Tempering Valve 20mm - Yellow Cap c/w Insulation
FTV20
Description
The FORGE Standard Tempering Valve is perfect for applications needing to mix hot and cold water to deliver a continuous temperate water temperature through a hot water system.
Features
- Integral mesh strainers
- Cast DR brass body
- Integral non return valves
- Innovative polymers for greater resistance to calcium deposits
- Factory set at 50°C (must be commissioned on site)
- Tested and certified to AS 4032.2
- Insulation jacket provided as per AS 4032.2
AVG Press & Temp Relief Valve (HTE55) 15mm x 1" Extrension - 1000KPA
FPTR15.1000E
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG Press & Temp Relief Valve (HTE55) 15mm x 1" Extrension - 1400KPA
FPTR15.1400E
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG Press & Temp Relief Valve (HT575) 20mm - 1000KPA
FPTR20.1000
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG Press & Temp Relief Valve (HT575) 20mm - 850KPA
FPTR20.0850
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG Press & Temp Relief Valve (HTT55) 15mm c/w 360 deg Swivel - 1400KPA
FPTR15.1400SV
Description
The FORGE™ range of Pressure Temperature Relief Valves (FPTR) '360 Degree Swivel Version" are designed to relieve the increase in pressure caused by water expansion during the normal heating cycle. Each valve is individually tested and calibrated to ensure that it meets the correct pressure specifications and manufactured, and watermark approved to Australian standards. Designed and manufactured to meet Australian Standard AS1357.1, under Licence No. 2639 and meets AS4020, Drinkable Water Standard
Features
- Suitable for either horizontal or vertical installations
- Auto reseat after each action
- Tested & manufactured to AS1357.1
- Meets AS4020, Drinkable Water Standard
- Watermark approved
- 2 Year Warranty
- Complete with insulation
AVG Hi Flo/ High Performance Tempering Valve -25mm Copper Olive c/w Insulation
FTV25HF
Description
The FORGE AVG HIgh Performance Hi-Flo Tempering Valve is perfect for applications for high flow hot and cold mixing at lower pressures.
Features
- Polymer Thermostatic cartridge
- Check valve assemblies Polymer Body, stainless steel filter, silicone seals
- Temperature adjustment range 35°C - 65°C (Disinfection setting) Legionella control
- Temperature control +/- 2C/LI>
- Dynamic pressure range 20 Kpa - 500 Kpa
- TMinimum flow rate 4 litres/min
- Insulation jacket provided as per AS 4032.2
AVG Thermostatic Mixing Valve 20mm Plumbed in SS Recessed Wall Box
FTMV20-PIB
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves with pre-plumbed wall box are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with the specified valve clearances of the Australian standards.
Features
- 305mm x 305mm x 75mm deep stainless steel wall box with hinged door
- Pre-fitted copper pipe tails with bypass option available
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
AVG Thermostatic Mixing Valve 15mm Plumbed in SS Recessed Wall Box
FTMV15-PIB
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves with pre-plumbed wall box are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with the specified valve clearances of the Australian standards.
Features
- 305mm x 305mm x 75mm deep stainless steel wall box with hinged door
- Pre-fitted copper pipe tails with bypass option available
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
AVG Thermostatic Mixing Valve 15mm Plumbed in SS Recessed Wall Box - c/w Bypass
FTMV15B-PIB
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves with pre-plumbed wall box are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with the specified valve clearances of the Australian standards.
Features
- 305mm x 305mm x 75mm deep stainless steel wall box with hinged door
- Pre-fitted copper pipe tails with bypass option available
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
AVG Thermostatic Mixing Valve 20mm Plumbed in SS Recessed Wall Box - c/w Bypass
FTMV20B-PIB
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves with pre-plumbed wall box are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with the specified valve clearances of the Australian standards.
Features
- 305mm x 305mm x 75mm deep stainless steel wall box with hinged door
- Pre-fitted copper pipe tails with bypass option available
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
Forge Solar Hot Water Frost Protection Valve 15mm
FPV15
Developed to meet the requirements of solar collector panels installed in frost prone environments.
Designed to protect solar systems from frost damage when the outside air temperature drops.
Important note: This AVG Frost Protection Valve is not recommended for freeze zones.
Designed to protect solar systems from frost damage when the outside air temperature drops.
Important note: This AVG Frost Protection Valve is not recommended for freeze zones.
15mm AVG Tempering Valve Standard Yellow Cap c/w SS Recessed Wall Box
FTV15-PIB
Description
The FORGE™ AVG range of High Performance Thermostatic Mixing Valves with pre-plumbed wall box are all manufactured and certified to meet the stringent requirements of AS4032.1 Thermostatic Mixing Valves. Watermark and NSW Department approved and comply with the specified valve clearances of the Australian standards.
Features
- 305mm x 305mm x 75mm deep stainless steel wall box with hinged door
- Pre-fitted copper pipe tails with bypass option available
- High performance and suitable for a wide range of applications
- High mixed water temperature stability under varying inlet conditions
- Rapid shut down of mixed outlet flow in the event of hot or cold water supply interruption
- Easily serviced
- Service operating range to as low as 60°C
- Anti Tamper adjustment mechanism
Information
Customer Services
Account
© Forge 2018. All Rights Reserved.
